Cabling

Hex Nut - Hot Dip Galvanized

Hot dipped galvanized nuts for threaded rod.  Sizes Include: 1/2" 5/8" 3/4"  

Threaded Rod - Hot Dip Galvanized

Threaded Rod - Hot Dip Galvanized Oversized freight applies Size Options: 1/2" -13 UNC 5/8" -13 UNC 3/4" -13 UNC Length: 6' Hot Dip Galvanized

Hot Dip Galvanized Eye Nut

Hot Dip Galvanized Eye Nut Our Eye Nuts are made of high quality drop forged Steel. 1/2" eyenut used on 1/2" threaded rod has 3/8" bail stock 5/8" eyenut used on 5/8" threaded rod has 1/2" bail stock Minimum Working Load Limit: 2250 lbs Hot Dip...

Lag Eye Screw

Lag Eye Screw Our Shoulder Lag Eye Screws are hot dipped galvanized.  Right hand threads available in 1/2" or 5/8" diameter.

J-Lags for Cabling

J-Lags Our J Lag Hooks are zinc plated. In situations where there is a short run of cable, you may use the combination of right and left hand thread lags to tension the cable eliminating the need for turnbuckles.  Drill hole 1/16" diameter...

Auger Bits for Tree Bracing

Mag-Bit® Timber Auger Bit Mag-Bit® 728 Timber Bits are designed for anyone who needs a deep hole or a long reach and are perfect for applications such as log homes, trees (arborists), railroad ties (landscape contractors), dock building,...

Auger Drill Bits for Tree Cabling

Auger Drill Bits for Tree Cabling Auger Bits feature an extra-long twist which is ideal for drilling installing cable and cabling hardware into trees.  Cutting spur scribes the outside of the hole during drilling for a smooth, clean hole...

Rigguy Wire Stop® Finishing Cap

The Finishing Cap is an optional component of the Wire Stop®. It provides a finished appearance and protection from exposed wire ends. The cap is made of UV protected vinyl.

Rigguy Wire Stop® Hub

The Wire Stop® hub is the middle of a hub and spoke system for joining three trunks or leaders together. Our hub solution is less damaging than triangulation because it only requires three holes instead of six. 

Preformed Tree Grip Cable Dead End

TREE-GRIP™ Dead-End TREE-GRIP Dead-Ends are designed to eliminate the costly labor and time consuming hassle of cable splicing. The factory-formed left hand lay helical legs of the TREE-GRIP Dead-Ends wrap quickly around left hand lay extrahigh...

Drop Forged Cabling Eye Bolts

Forged Steel Eye-Bolts for tree cabling are designed to be used in traditional methods. PLP thimbles are hot-dipped galvanized to ASTM A153 standards for the best corrosion resistance. Correctly sized nut included to aid in...

CMI Rope Jack

Product Description The CMI Rope Jack is a Mechanical Advantage tool for pre-tensioning static lines, light lifting and cabling. The Rope Jack is small enough and light enough to be carried aloft by a climber for Mechanical Advantage within the crown...